Patterns to Make Doll House Furniture Out of Foam Core

Download Commodity

Download Article

Whether you're making doll furniture or a school project, miniature furniture can be challenging without a plan. Create a chamber set with a miniature lamp, storage tote, and bed. Gather your supplies and follow simple patterns earlier you attempt to move on to more complicated designs.

1. 1

   Gather supplies. Whether you purchase your supplies at a dollar store or at your local craft store, you will need cream marshmallow, cardstock, a cotton swab, a wooden dewdrop, mucilage and paint. Create a lampshade using foam marshmallow, use the wooden bead to create a detailed lamp base, embrace the lampshade with the cardstock, and use the cotton swab as your lamp post.^[1]

   • Foam marshmallow is a small piece of foam that looks exactly similar marshmallow. Cardstock is similar to scrapbook paper but thicker. Choose your prefered colours every bit craft stores often conduct a broad diversity.^[2]
   • Avoid using super gum on foam as it is strong enough to atomize it.

2. ii

   Paint the wooden bead. Choose a color that fits the scheme of your furniture set. It will relieve you money if you are able to utilise your paint on multiple pieces of furniture. Employ a fine tipped paint castor which can be purchased at your local crafts or art supply store.^[3]

   Advertizement

3. 3

   Choose your height. Using a pivot or razor, poke a pigsty in the cream marshmallow at its center. Cut the cotton fiber tips off of the cotton swab and use the remaining wood shaft equally your lamp post by inserting it into the pigsty at the center of the foam marshmallow. Place the other end of the lamp mail into the wooden bead and arrange to your prefered meridian.^[iv]

   • Utilise sharp scissors to cut the cotton swab equally dull scissors may crusade it to splinter. Cut in minor increments to ensure that you don't brand your lamp as well short.

4. 4

   Create the lamp shade. Place the cardstock around the foam marshmallow to measure the height and width of your lampshade. Be sure to add some extra leeway on the tiptop so you tin can fully cover the foam. Once satisfied with your measurement, cut the cardstock and glue information technology onto the cream marshmallow for your lampshade. Add a drib of glue into the opening of the dewdrop and stick the cotton wool swab in to complete the lamp.^[5]

   • Center foam before gluing the cardstock. Brand sure that there is a small space at the bottom and acme of your lamp shade.
   • Allow each slice to dry out completely.

   Advertisement

1. 1

   Get together your supplies. Y'all will need to obtain a fast food dipping sauce container that approximately 2.25 inches (5.71 cm) x 1.25 inches x 1 inch (two.5 cm) high. You volition likewise need fun foam (three" 10 2"), white menu stock paper (10" x 3/16"), acrylic paint, mucilage, matte sealer, scissors, and a pencil.^[6]

   • The fun foam can be whatever color as yous will be painting information technology. The paper needs to be card stock as regular paper will ripple when painted. Cull your prefered colour of acrylic paint and a matte sealer as glossy will provide as well much shine.^[7]

2. ii

   Ready your container and lid. Launder the container and dry it completely. Smoothen the lip by trimming whatever extra plastic. Turn the container upside down and utilize a pencil to trace the face up of the container onto the Fun Foam in order to brand the hat. Cut out the hat being mindful not to create any jagged edges. Glue the container'southward top to the fun cream.^[viii]

   • Make certain the glue has completely dried before yous trim the edges. Cut the edges to ensure the top is shine and to avert whatsoever ripples.

3. 3

   Attach the lid lip. Starting at the short end of the container, wrap the strip of cardstock around the edge and create the lip for the top of the container. Slightly overlap the offset and end of the cardstock equally yous continue around the unabridged edge of the container. Utilize tweezers or forceps to set the cardstock in place and glue where necessary.^[9]

   • Let the glue dry and be mindful to only use a little bit of glue as any excess will create visible drops or marks.
   • Trim any excess cardstock to create a smoothen even line all the way effectually the container.

4. 4

   Paint and seal. Choose your color and paint several coats on both the tote and the lid. Dry before applying each coat and aim for at least iii coats of paint. Once your final coat has dried, employ sealer it requite information technology a plastic cease.^[10]

   • Use a fine tipped paint brush or cutting an angled slice of foam to use the paint and sealer. You may besides add a label or graphic design to your tote.

   Ad

1. 1

   Get together your supplies. You will need cardboard, glue, acrylic pigment, and foam to employ as stuffing for the bedding and mattress. You may find these items at a dollar store or your local arts and craft shop.^[xi]

   • At that place are many types of foam just you desire to go with something that isn't very rigid every bit you may not be able to stuff it into the bedding and mattress. Polyurethane cream is low quality and, as such, the cheapest option; however, it is used for regular bedding and packing filler, and volition be piece of cake to place inside your bedding and mattress. You do non want to spend a lot on your foam because it will be covered and you will only be using a small amount.^[12]

2. 2

   Cutting out and assemble a bed frame. Find a bed frame pattern online and measure to your preference. Your headboard and footboard should roughly be the same size or the headboard may be slightly larger. Once you're satisfied with the size, cut these 2 pieces from your paper-thin. Measure out and cut the base of the bed. This will exist slightly larger than your mattress.^[13]

   • The base of the bed volition be comprised of 2 side pieces that will be long and skinny rectangles. These will connect to both the headboard and footboard to create your bed frame.
   • You should take 5 total pieces fabricated from your cardboard: headboard, footboard, base, and 2 side pieces.
   • Mucilage all 5 pieces together to create the bed frame by gluing the headboard and footboard with the base and adding the side boards at the end. The side boards volition be placed forth the exposed edges of the bed.

3. three

   Build the mattress. Cut and stuck some cardboard and so that they fit snuggly in the bed frame without obstructing your headboard or warping the frame. Glue the pieces together and use wrapping cream around the paper-thin in one case dry. Stitch the foam effectually the paper-thin.^[14]

4. 4

   Paint the bed frame. Paint your bed frame with acrylic paint. Use a fine tipped castor that may be purchased at a dollar store or an arts and craft store. You may demand up to three coats to depending on how nighttime and rich y'all want your color to be.^[xv]

   • Yous may add a design or stickers once the paint has dried.
   • Once painted, place the mattress into the bed frame and glue it into place.

5. 5

   Brand a blanket and pillows. Hold a piece of foam against the mattress to measure out the width of your blanket so that the edges come slightly by the bed. Cutting 2 rectangle pieces of foam for your pillows. You may cut them to your prefered size or cut extras for throw pillows.^[16]

6. 6

   Stitch up a blanket cover and pillow cases. Cutting cloth for your pillows and blanket making sure that you leave enough backlog fabric that information technology covers the foam and can be stitched closed. It is easiest to cut two pieces of cloth to embrace each pillow and your blanket. Leave the detailed fabric, or part of the textile with a design, facing inside as yous sew the pieces together.^[17]

   • Leave a small opening before closing and plough the fabric right side out. Embrace the foam and sew the cover closed by folding the opening in and stitching the side.
   • You may likewise add embroidery or design if y'all have the time.

   Advertisement

Add together New Question

• Question

  How practice I make a doll vending machine?

  

  Use the inside sliding part of a matchbox, pigment the outside black. (Or your preferred colour.) For the trivial coils that dispense nutrient, take a piece of wire and wrap it around a pencil. Mucilage them into the inside. Then, colour and cut the lilliputian snack shapes out and identify them inside the coils. Lastly, a big piece of clear packing tape stretched over the front end should make a good viewing window.

• Question

  Can I make a trivial bed with a soapbox?

  

  Yes, but information technology would have to be for a very pocket-sized doll.

• Question

  How can I brand a study table for a doll?

  

  Go to a arts and crafts shop and get a wood plaque the same size yous want for the top of the desk. Then, buy two wood messages (good options are A, V, Fifty, and W). These letters will serve equally the legs. Hot glue the letters to the bottom of the wooden plaque on each side. One time dry, paint information technology still you'd like.

Ask a Question

200 characters left

Include your electronic mail address to get a bulletin when this question is answered.

Submit

Advertizement

• Consummate article of furniture kits may be purchased at arts and craft stores or online.

• Search your home for any materials that you may be able to utilise.

Thanks for submitting a tip for review!

Ad

• Avoid inhaling any fumes from paint and gum by working in a well ventilated area.

• Be careful when working with sharp knives and scissors as you try to cut tiny patterns.

Advertisement

Things You'll Need

• Scissors
• Gum
• Stuffing or tissues
• Fabric
• Paper
• Foam marshmallow
• Cardstock
• Cotton swab
• Wooden bead
• Paint
• Fast nutrient dipping sauce container (2.25" x 1.25" x 1")
• Fun Foam (3" ten 2")
• White card stock paper (ten" 10 iii/16")
• Acrylic pigment
• Matte sealer
• Pencil
• Cardboard

About This Article

Thanks to all authors for creating a page that has been read 177,442 times.

Did this article help you lot?

Share this post